19
Requirements for electric connection
Safety precaution
Grounding requirement
1. Must follow the electric safety regulations when installing the unit.
$FFRUGLQJWRWKHORFDOVDIHW\UHJXODWLRQVXVHTXDOL¿HGSRZHUVXSSO\FLUFXLWDQG
circuit break.
3. Make sure the power supply matches with the requirement of air conditioner.
8QVWDEOHSRZHUVXSSO\RULQFRUUHFWZLULQJRUPDOIXQFWLRQ3OHDVHLQVWDOOSURSHU
power supply cables before using the air conditioner.
4. Properly connect the live wire, neutral wire and grounding wire of power socket.
5. Be sure to cut off the power supply before proceeding any work related to
electricity and safety.
'RQRWSXWWKURXJKWKHSRZHUEHIRUH¿QLVKLQJLQVWDOODWLRQ
7. If the supply cord is damaged, it must be replaced by the manufacturer, its
VHUYLFHDJHQWRUVLPLODUO\TXDOL¿HGSHUVRQVLQRUGHUWRDYRLGDKD]DUG
8. The temperature of refrigerant circuit will be high, please keep the interconnec-
tion cable away from the copper tube.
9. The appliance shall be installed in accordance with national wiring regulations.
10.Installation must be performed in accordance with the requirement of NEC
DQG&(&E\DXWKRUL]HGSHUVRQQHORQO\
7KHDLUFRQGLWLRQHULVWKH¿UVWFODVVHOHFWULFDSSOLDQFH,WPXVWEHSURSHUO\
JURXQGLQJZLWKVSHFLDOL]HGJURXQGLQJGHYLFHE\DSURIHVVLRQDO3OHDVHPDNH
sure it is always grounded effectively, otherwise it may cause electric shock.
7KH\HOORZJUHHQZLUHLQDLUFRQGLWLRQHULVJURXQGLQJZLUHZKLFKFDQWEHXVHG
for other purposes.
3. The grounding resistance should comply with national electric safety regulations.
4. The appliance must be positioned so that the plug is accessible.
$QDOOSROHGLVFRQQHFWLRQVZLWFKKDYLQJDFRQWDFWVHSDUDWLRQRIDWOHDVWPPLQ
DOOSROHVVKRXOGEHFRQQHFWHGLQ¿[HGZLULQJ
6. Including an circuit break with suitable capacity, please note the following table.
$LUVZLWFKVKRXOGEHLQFOXGHGPDJQHWEXFNOHDQGKHDWLQJEXFNOHIXQFWLRQLWFDQ
protect the circuit-short and overload. (Caution: please do not use the fuse only
for protect the circuit)
$LUFRQGLWLRQHU Circuit break capacity
18
ǃ
24K $