Filter
Top Products
Manual 2100-467
Page 7 of 23
TABLE 4
OPTIONAL FIELD INSTALLED ELECTRIC HEATER TABLE
retaeH
egakcaP
.oNledoM
stloVtinU
sesahP
yticapaC&WK.rtH
stloV042@
yticapaC&WK.rtH
stloV802@
V802/042
.rtH
spmA
retaeH
lanretnI
tiucriC
rekaerB
BtiucriC
WKHUTBWKHUTB
dleiF.oN
stiucriC
3
.niM
tiucriC
yticapmA
1
revO.xaM
tnerruC
noitcetorP
2
dleiF
rewoP
gniriW
2
dnuorG
eziSeriW
50A-313PHE1-802/0425
00
1,7157.3008,211.81/8.02
06/03
132/6252/0301/0101
01A-313PHE1-802/04201001,4305.7000,622.63/6.141
64
/3505/068/601
51A-313PHE1-802/04251002,1552.11004,831.45/5.26186/9707/084/48
50A-315PHE1-802/0425
00
1,7157.3008,211.81/8.02
06/03
132/6252/0301/0101
01A-315PHE1-802/04201001,4305.7000,622.63/6.14164/3505/068/601
51A-315PHE1-802/04251002,1552.11004,831.45/5.26186
/9707/084/48
90B-313PHE3-802/0429007,0357.6000,327.81/7.12
enoN
142/8252/0301/0101
51B-313PHE3-802/04251002,1552.11004,832.13/2.631
93
/6404/058/801
90B-315PHE3-802/0429007,0357.6000,327.81/7.12
enoN
142/8252/0301/0101
51B-315PHE3-802/04251002,1552.11004,832.13/2.631
93
/6404/058/801
IMPORTANT: While this electrical data is presented as a guide, it is important to electrically connect properly sized fuses and
conductor wires in accordance with the National Electrical Code and all existing local codes.
1 Maximum size of the time delay fuse or HACR circuit breaker for protection of field wiring devices.
2 Based on wire suitable for 75°C. Other wiring materials must be rated for marked “Minimum Circuit Ampacity” or greater. Based on 75°C copper wire. All wiring must
conform to the National Electric Code and all local codes.
3 These “Minimum Circuit Ampacity” values are to be used for sizing the field power conductors. Refer to the National Electric Code (latest revision), Article 310 for power
conductor sizing.