Filter
Top Products
1. Safety
1. SAFETY
1.1 Safety guidelines
WARNING: Hot Surface and Risk of Explosion:Switch the projector to stand by and let it cool down for at least
15 minutes . These lamps consist of a quartz arc tube operating at very h igh temperature and high pressure
which may explode suddenly. There is a risk of personal injury and property damage from hot quartz arc tube
particles if handled incorrectly.
WARNING: Risk of Electrical Shock: Power down the projector and unplug the power cord from the wall
outlet. Once the projector is cooled down and the power is off, continue with the procedure.
WARNING: Lamp Runtime Warning: Do not exceed the indicated maximum total lifetime of the lamp for safe
operation in normal power mode. Do not use it longer ! Always replace the lamp with the BARCO lamp kit.
WARNING: UV Radiation Exposure : Nev er light the lamp if the rear cover (lamp cover) of the projector is
removed, unless you wear UV radiation eye and skin protection.
WARNING: : Do not operate the projector longer than one minute with the rear cover removed.
CAUTION: : Never ope rate the projector with only one lamp installed.
1.2 Recycling guidelines
WARNING: Do not break or crush lamps because this may pose health and environmental risks when mercury
vapors are released.
CAUTION: To avoid breaking the lam ps, repack carefully when storing an d t ransporting them .
R59770361 SIM 5W LAMP KIT 28/11/2008 3