Filter
Top Products
Seven Instruments in One Small, Rugged Package
Air-Free Carbon Monoxide
In some situations, ambient measurement of carbon monoxide alone may
not be adequate. ANSI Z21.1 standard requires an Air-Free calculation for
appliance emissions in furnace flues, oven vents and space heaters. Both
ambient and air-free carbon monoxide measurement are readily available in
the Gas Hunter.
Confined Space Entry
In the safety mode, audible and visual alarms are activated at OSHA preset
levels for combustibles (in the lower Explosive Level), carbon monoxide and
oxygen (in enriched and deficient atmospheres). The Gas Hunter serves
as a trusty watchdog for technicians working in vaults, trenches or other
confined areas.
Pressure Monitor
Who is to say that a combustible gas detector must be limited to just
detecting gas? The addition of low range (0.0 to 27.7" wc) pressure function
further separates the Gas Hunter from the competition. Aside from one
less tool to carry to the worksite, this function eliminates the use of messy
liquid monometers and erratic spring gauges. It gives the service tech the
convenience of quick, accurate gas pressure checks on regulators
and appliance manifolds.
Draft Gauge
In the flue mode, the Hunter offers yet another tool alternative in the
0.00 to negative 28
" of water column draft function. This enables the service
technician to utilize a more accurate and sophisticated method to check draft
in hot water tanks and furnace flues.
Leak Search
The PPM range of the Gas Sampling mode offers visual, segmented
bar-graph, and audible detection of natural gas leaks from 50 ppm to
2,500 ppm. The Hunter serves as an excellent tool for tracking
down small leaks; replacing messy soap bubble solutions and broad-
band MOS type instruments.
Leak Survey
Higher concentrations of natural gas are easily measured from 0.2 to 100%
volume gas with no operator intervention. Auto-ranging makes leak
investigations and bar-holing operations simple through Bacharach’s
patented sensing technology. This minimizes operator training and
eliminates confusing range settings, over-range messages and damage to
catalytic sensors as a result of high gas concentration exposure.
Carbon Monoxide Calls
The 0-1000 ppm carbon monoxide function eliminates yet another
instrument that the First Responder must carry on the job. Residential
CO surveys are reliably and easily performed with the Gas Hunter. In
addition, oxygen and combustible gas levels
are monitored simultaneously,
but displayed through
individual readings.
Bar-holing application
Leak search application