Bacharach 19-9336 Carbon Monoxide Alarm User Manual


 
Features
Compact Gas Leak Detector - The Leakator Jr. detects and pinpoints
combustible gas leaks in commercial, residential, and industrial applications,
including surveying gas pipelines
Wide Variety of Combustibles Detected - Acetone, Acetylene, Benzene,
Butane, Ethanol, Ethylene Oxide, Gasoline, Hexane, Hydrogen, Industrial Solvents,
Iso-Butane, Methane, Methanol, Paint Thinners, Propane, Natural Gas, and
Naptha.
Compact and Ergonomic Design - Simple one button control allows the
user to hold and operate the instrument in one hand. The exible probe with sensor
located at the tip allows leaks to be found in tight spaces.
Leak Indication - The relative concentration of the combustible gas present is
indicated by the frequency of the audible and visual alarms.
Automatic Calibration - The instrument automatically calibrates itself during
warm up when turned ON in fresh air.
Selectable Sensitivity - High and low sensitivity mode selectable by a double
press of the ON/OFF button. Pinpoints concentrations as small as 20 ppm in the
high-sensitivity mode.
Power - Four disposable ‘AA’ alkaline batteries provide a minimum of 14 hours of
operation. A low battery indicator warns the user when the batteries need replaced.
The instrument will also automatically turn itself OFF after a period of non-use to
preserve battery life.
UL 913 Approved - Intrinsically safe for Class I, Division 1, Groups A, B, C, and D.
Sensor Error Indicator
Low Power Metal Oxide Sensor
Microprocessor Controlled Circuitry
SPECIFICATIONS
Package Contents
Leakator Jr. instrument housed in a four piece molded ABS
plastic case including 4 ‘AA’ batteries, cloth case, sensor,
and instructions.
Power
Four ‘AA’ alkaline batteries, 14 hours typical life for continuous
operation
Warm-Up Time
Automatic, self check, about 60 seconds to operational
condition
Sensor Low power metal oxide sensor
Probe Self storing 12 inch exible probe
Sensitivity
(Methane Based)
20 ppm in high-sensitivity mode
50 ppm in low-sensitivity mode
Status Indicators
Visual: Red, Orange and Green LEDs
Audible: Variable speed beeping sound
Environments 32 to 104°F (0 to 40°C)
Dimensions 6H x 2W x 1.5D inches (152 x 51 x 38 mm)
Weight Less than 6 oz (170 g) with battery
Safety Approvals
UL 913, intrinsically safe for use in Class I, Division 1,
Groups A, B, C and D hazardous locations
Warranty 2 years full warranty on instrument