Filter
Top Products
Set the High Temperature Limit Stop (optional)
Loosen the set screw on the
handle.
Remove the handle.
Remove the clip and the high
temperature limit stop from
the stem.
Grasp the barrel on the
cartridge and turn it counter-
clockwise to turn on the
handshower.
Turn the stem until the water coming out of the handshower
is the desired maximum high temperature (usually about
110
o
F).
Grasp the barrel and turn it
clockwise to turn the water
off.
Replace the high temperature
limit stop so that it is against
the brass stop on the top of the
cartridge. Replace the clip.
Reinstall the handle. Tighten
the set screw.
13