Filter
Top Products
3
Installation
If the thickness of the mounting surface is between
1 5/8“ and 3“ thick, install the shank extension to
the faucet first.
Place the faucet and sealing ring on top of
the mounting surface.
From beneath the mounting surface, install
the plastic mounting spacer (if the mounting
surface is 5/8“ thick or less), fiber washer,
metal washer, and mounting nut.
Tighten the tensioning screws.
Attach the supply lines to the stops with 3/8“ com
-
pression fittings (not included).
Turn on the water and check all connections for
leaks.