Filter
Top Products
2
Technical Information
Max. flow rate 2.2 gpm
Max. water pressure 145 psi
Recommended water pressure 14.5 – 72 psi
Recommended hot water temp. 120°F – 140°F*
*Know and follow all applicable local plumbing codes when setting the
temperature on your water heater.
Installation Considerations
Rough valve 10303181 must be installed. The finished wall must be installed and made wa-
tertight before installation of this trim kit.
For best function of this unit, the hot and cold supplies must be of equal pressure.
This faucet may be used with a continuous flow water heater as long as the flow pressure is at
least 14.5 psi.
For best results, Hansgrohe recommends that this faucet be installed by a licensed professional
plumber.
Turn the water off at the main before beginning installation.
•
•
•
•
•
Axor Citterio M Wall-mount Lavatory Faucet
34315XX1