Filter
Top Products
4
Thread the friction washers, metal washers and
mounting nuts to the valve shanks.
Tighten the mounting nuts by hand. Tighten the
tensioning screws.
Install the spout, slide bushing and o-ring. Make
sure that the slide bushing is oriented correctly.
Tighten the set screw.
Lightly coat the handle o-rings with the en-
closed lubricant.
Install the index caps on the hot and cold
handles and pull rod assembly.
16510XX1 only: Install the pop-up drain.
Caution: the hot water
riser may be hot!