Filter
Top Products
2
Technical Data
Flow rates @ 45 psi
Showerhead 2.5 gpm
Handshower 2.5 gpm
Bodysprays 4.3 gpm
Maximum water pressure 145 psi
Recommended water pressure: 40 - 75 psi
Recommended hot water temp.: 120°F - 140°F*
A check valve is installed in the handshower outlet.
The high temperature limit stop may be reset to comply with local plumbing codes. See page
5.
This unit is listed by IAPMO and is approved for use in Massachusetts.
Please save this document as it contains user, maintenance and warranty
information.
*Please know and follow all applicable local codes when setting the temperature on the water heater. In
Massachusetts, the water heater may be set no higher than 112°F.
•
•
•
•
Starck X Waterwall
10920001