Filter
Top Products
4
5
Assembly
1. Flush pipe lines thoroughly.
2. Place the mixer including the sealing washer in
position on the sink.
3. Slip the slide washer, washer and collar nut over
the flexible hoses and threaded base and tighten
the collar nut by hand.
4. Tighten screws.
5. Connect the flexible supply hoses to the angle
valves: hot-left; cold-right.
Large differences in pressure between the hot and
cold water supply should be balanced.
Operation
Turn on by lifting handle.
Swivel to the left: hot water
Swivel to the right: cold water.
Technical Data
Operating pressure: max. 147 psi
Recommended operating press.: 14.7 - 72.5 psi
Test pressure: 232 psi
Hot water temperature: max. 176° F
Recommended hot water temp.: 149° F
Hole size in deck:
Minimum: 1 1/4"
Maximum: 1 3/8"
hot
cold