Filter
Top Products
9
Clean the aerator and filters -- all models
If the water flow is reduced over time, clean the aerator
(a) and the filters (b).
Turn the water supplies off (1). Disconnect the power
cable (2).
Starck 10101/10106/10140/10145 -- unscrew and
remove the aerator (a).
Starck X 10170/10175/10180/10185 -- remove the
spray former (a), using a 2 mm Allen wrench to loosen
the screws. Do not lose the screws!
All models -- disconnect the hot and cold supply hoses from the adapters. Remove the filters (b).
At another sink, rinse the filters and the aerator or spray former.
Reinstall the aerator or spray former.
Replace the filters. Reconnect the hot and cold supply hoses (see page 4).