Filter
Top Products
5
Install the valve trim
Push the escutcheon over the valve.
Install the handle. Tighten the screw with a
3 mm Allen wrench. The screw must
engage the slot on the cartridge.
Justify the handle.
Set the high temperature limit stop.
Push the spout sealing ring firmly into the spout
adapter (1).
Push the escutcheon and spout over the adapter
and sealing ring (2).
Tighten the screw using a 3 mm Allen wrench (3).
Do not over tighten the set screw.
Over tightening the screw may
damage the o-rings, which will
cause the spout to leak.
Install the spout
Remove the plug.
3
2
1
slot