Filter
Top Products
7
Set the high temperature limit stop
Turn the water on to the tub spout or handshower.
Use a 3 mm Allen wrench to loosen the handle
screw. Remove the handle from the valve.
Carefully remove the retainer clip and the limit
stop ring.
Turn the temperature control stem until the water is
the desired high temperature, usually 110°F* .
Turn the stem clockwise to make the water
cooler, turn it counter-clockwise to make the water
warmer.
*Know and follow all applicble local plumbing codes when
setting the high temperature limit stop.
In Massachusetts, the maximum output temperature can be no
higher than 112° F.