Filter
Top Products
3
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
The screws and anchors included with this set are suitable for use in a tile or other solid
surface wall. They are not suitable for use in an acrylic or fiberglass shower enclosure.
Please contact the manufacturer of the enclosure regarding recommended mounting loca-
tions, reinforcement requirements, and mounting hardware.
This unit does not include a wall supply. Use Hansgrohe model 27458XX3 or another
supply that complies with ASME A112.18.1/CSA B125.1 including ASME A112.18.3.
In Massachusetts, the maximum output temperature of the shower valve can be no higher
than 112°F.
•
•
•
•
•
Technical Information
Croma E 75 3-Jet handshower 2.5 gpm
Full, massage, turbo massage
Croma E 75 2-Jet handshower 2.5 gpm
Full, turbo massage
Clubmaster handshower 2.5 gpm
Full, massage, soft aerated
Raindance E 120 AIR handshower 2.5 gpm
AIR, Whirl AIR, Balance AIR
Monsoon II handshower 2.5 gpm
Full, massage, turbo massage