Avalon Stoves Seattle E Indoor Fireplace User Manual


 
C M Y CM MY CY CMY K
The Atmosphere Is Electric!
Add the warmth and glow of a real fireplace where you could
not before with Avalon’s new Seattle Electric fireplace.
To most people, adding an electric fireplace means heading to your
local ‘Home Improvement Warehouse’ and buying a plain black
firebox with a veneered surround that looks like a cheap add-on
to the room. With The Seattle™ E we’ve designed an electric
fireplace that not only fits within the home’s architectural style, but
dazzles the eye and seduces the senses with its gorgeous, dancing
flames and glowing embers.
It’s Really That Easy!
Operating from any 110 volt wall outlet, the Seattle E is conveniently
plug-and-play. Ideal for apartment renters, condo owners, basements,
offices, bedrooms, and today’s busy lifestyle. No chimney, vent or
gas access is needed for the Seattle E to burn brightly. And, when
you move - take your fireplace with you!
It’s All In The Fire!
The radiating, pulsating fire of the Seattle E can be viewed through
564 square inches of glass. A custom, high quality log set glows as
the fire appears to burn and the ember bed flickers. The light intensity
of the flame can be modulated with the remote control, as well as
the speed of the flame. The remote control also has the ability to
control the interior accent light, sleep timer, room temperature, power,
and clean air system.
Clear Up The Air!
The Seattle E features the patented Purifire™ clean air system. The
system uses a built-in fan to circulate and purify the air of an average
room (12’ X 14’) four times per hour.
Add A Little Warmth!
A built-in heater and circulating fan is yet another feature of the
fireplace. Producing 5,000 Btu’s and heating up to 400 square feet,
the fireplace serves perfectly for adding supplemental heat to the
room the fireplace is in. Operating costs when used with the built-
in thermostat averages about 8 cents* and hour.
*When used with thermostat. This may vary with your local utilitie costs.
Personalize Your Look!
You can personalize the finished look of your Seattle E fireplace with a black painted frame or one of three different
36 inch wide custom designer faces in a variety of colors and finishes.
Add A Fireplace Anywhere:
Build the Seattle E into an existing wall or chase and
sheet-rock up to the face. Or you can finish it off like a
traditional fireplace with stone or tile. Shown with the
Bungalow face and J. C. Huffman Osage mantel.
Purifire™ Clean Air System:
The filter is easy to remove and clean. The system is designed
to circulate and clean the air in an average room 4 times per
hour. This system is designed to remove any impurities, spores
and dust as small as one micron from your home.
*Purifire is a registered trademark of Dimplex™ N. A. A.
With The Remote
You Control:
1. Room Temperature
2. Thermostat - Set Room Temperature
3. Accent Light Dimmer - Hight to Low
4. Flame Speed - Hight to Low
5. Sleep Timer
6. Purifire® High to Low
7. Flame & Heat On/Off
8. Purifire® On/Off
Forest Grove Black Frame
The economical, basic metallic black frame with embossed
wood grain is designed for a clean simple look.
33” W x 28” H
Victorian Lace™ Face
The delicate Victorian Lace face design features woven
grill work in a charcoal paint finish.
36 1/8” W x 29” H
Bungalow™ Face
The Bungalow™ double door face design features a
charcoal powder coated textured surface.
36 1/8” W x 29” H
Tree of Life™ Face
The organic Tree of Life double door face design features
a bronze powder coated textured surface.
36 1/8” W x 29” H