Filter
Top Products
12 Reasons To Buy A Newport Bay
Tested by Warnock Hersey to UL 1482/ULC S627/CSA B366.2/ASTM E 1509-95. This pellet fired appliance has been tested and listed for use in
manufactured homes in accordance with Oregon Administrative Rules 814-23-900 through 814-23-909.
Your Authorized Avalon Dealer Is:
NOTE: Improper installation of your gas appliance or failure to operate it according to the guidelines
detailed in the Owner's Manual may negate your warranty and endanger your home and family.
*Heating capacity may vary depending on degree of home insulation, floor plan and ambient temperature zone of the area in which you live.
Contact your local building or fire officials about installation requirements in your area.
Height
Width
Depth
Depth into
Fireplace
11 5/8”
Depth into
Hearth
9 1/2”
22 1/8"
21 1/8"
19 1/8"
Minimum Hearth Size:
34 1/8" Wide x 15 1/2" Deep
Newport Bay Pellet Insert Performance
Hopper
Capacity
35 lbs.
Heating
Capacity*
800 to 1,600 Sq. Ft.
Max. Burn Time
Low -10 Hours
High -30 Hours
BTU Range
Low - 8,100
High - 28,000
Options:
- Cast Log Set
- Remote Control
Themostat
Clearances to Combustibles
I
E
F
C
B
A
D
Please refer to fireplace insertclearance drawing at right.
A = Insert Top to Mantle 13”
B = Insert Top to Top Facing 10”
C = Insert Side to Sidewall 6”
D = Insert Side to Side Facing 6”
E = Hearth Extension Front 6”
F = Hearth Extension Side 6”
Panels
Minimum Fireplace
Dimensions
19 5/8” Tall
30” Wide
16 5/8” Deep
(includes 5” for vent)
Please review the below information to determine which panel size will meet your
needs. All panel kits include panels, brass trim and standoffs.
8" x 10"
Panels
28 7/8" x 40 1/2" Panels
10" x 13"
Panels
31 7/8" x 44 1/2" Panels
™
Kirkland, WA
Visit us online: http://avalonstoves.com
We reserve the right to improve our products at any time without prior notification. Photos and illustrations are for descriptive purposes only. • Copyright © 2000
7. Auger Motor. A heavy-duty gear motor with
metal gears, low r.p.m. and high torque, ensures
long life and reliability.
8. Variable Speed Convection Blower. This quiet blower
draws cool room air around the firebox, and two-stage
heat exchanger to deliver heated air to your home.
9. Firepot & Standard Ignitor. Stainless steel firepot and
reliable ignition system combine to make firestarting and
pellet burning as easy as the flip of a switch.
10. Ash Dump. Easy to access and operate, the ash
drop makes ash clean-up in the firebox a simple
mess free operation.
11. Convenient Ash Pan. Designed for ease of removal.
12. State-of-the-Art Circuit Board Operation.
Operate your pellet stove manually or automatically
with the use of a wall thermostat for the ultimate in
hands free operation.
1. Easy Fuel Loading. Insert top lifts up and locks
open to allow easy access for pellet loading.
2. Large Pellet Capacity. Hopper holds 35 lbs. of
pellets for up to 29 hours of continuous heat.
3. Heavy-Duty Auger. Precision auger feeds pellet
fuel uniformly to the firepot on the automatic or
manual feed rate settings.
4. Two-Stage Heat Exchanger. Combination of 8
heat exchange tubes and rear heat exchange
plenum gains maximum heat transfer from the stove
to your home.
5. Air Tube Scraper. Concealed under the loading
door, this easy-to-use, pull rod removes ash from the
air exchange tubes with no mess or special tools.
6. Super-Quiet Combustion Blower. Variable speed
control allows you to turn the blower noise down in
conjunction with the feed rate.
Clearance To Combustibles