Filter
Top Products
TH134 400-134-000-A 1/27/05 3/4
Whenever an order is received via the remote input, it becomes the
active order for all 3 zones. To know which orders can be initiated
by the energy manager, the phone controller or the home automa-
tion system, see the table on page 1. The is displayed when
signals are received via the remote input.
Orders received via the remote input have priority over orders initi-
ated via the TH134 programmer. However, you can bypass the
remote input order for each zone for 2 hours. At the end of the 2
hours, the remote input order becomes active again.
n Select the zone using the Zone button. (Press for 3
seconds to select all 3 zones.)
o Press the desired order button.
The icon flashes during the bypass.
The same schedule is used by default for all 3 zones as shown
below.
Use the following procedure to select the order and the start time for
each of the 4 programs for each zone. The settings of each pro-
gram will be the same for each day. However, you can then select
which programs to be executed for each day and for each zone.
n Press the PGM to start programming.
o Select the zone using the Zone button. (Press for 3
seconds to select all 3 zones.)
p Select the program using the PGM button.
q Set the program start time.
r Select the mode by pressing the corresponding button.
s Repeat steps 3 to 5 for the remaining programs for the selected
zone.
t Go to step 2 if you wish to select another zone.
u Press to exit programming.
TH134 will automatically exit programming if no button is
pressed for the last 60 seconds.
When selecting the number of programs,
n Press the MAN/AUTO button for 3 seconds
until PPd is displayed.
o Select the zone using the ZONE button.
(Press for 3 sec. to select all 3 zones.)
p Press MAN/AUTO until the desired day is
displayed.
q
Set the number of programs for the selected
day using the buttons.
The options are:
• 4 (to select all 4 programs)
• 2 (to select program 1 and 4 only)
• 0 (no program is selected for that day)
If no program is selected for a particular day, TH134 uses
the order of the last program until the start of the next program.
r Repeat steps 3 and 4 for the each remaining day.
s Go to step 2 if you wish to select another zone.
t Press to exit.
Enter your settings in the following table.
Preprogrammed Sched ul ePreprogrammed Sched ul ePreprogrammed Sched ul ePreprogrammed Sched ul ePreprogrammed Schedul e
Preprogrammed Sched ul ePreprogram med Schedul e
Preprogrammed Sched ul e
Preprogrammed Sched ul ePreprogrammed Schedul e
Preprogrammed Sched ul e
Preprogrammed Sched ul ePreprogrammed Sched ul e
C
√√√√√√√
S
√√√√√
C
√√√√√
S
√√√√√√√
4 4 4 4 4 2 2
Schedule customizationSchedule customizationSchedule customizationSchedule customizationSchedule customization
Schedule customizationSchedule customization
Schedule customization
Schedule customizationSchedule customization
Schedule customization
Schedule customizationSchedule customization
Wake-up time
Every day
Leave for work
Monday to
Friday
Return home
Monday to
Friday
Sleep time
Every day