Filter
Top Products
Temporary or permanent temperature bypass
This operation allows you to temporarily modify the floor temperature while you
are in the Automatic mode. Simply press on or buttons to select the desired
temperature, or the or button to select the Comfort or Econo settings you
have programmed.This temperature will be maintained until the beginning of the
next programmed schedule.
You can also switch to the V
acation setting for a prolonged absence by pressing
on and at the same time.The display will show icon. In that case,
the derogation is permanent. T
o return to the normal operating mode, press on
Mode button.
If you wish to immediately return to the programmed settings, press on Mode
button twice.
1- Press on PGM button to access the programming mode.
2- Press on Day button 3 seconds to select every day of the week.
3- Press on Hour and Min buttons to enter 6:15 AM Prog. 1, ( ).
4- Press on PGM button to select Prog. 2 ( ) and Hour and Min buttons to
enter 8:15 AM.
5- Repeat step 4 to enter Prog. 3 (5:00 PM) and Prog. 4 (10:00 PM).
NOTE :
When making modifications, make sure you are in the right
program.
To modify the Saturday and Sunday schedules:
6- Press on Day button until SA or SU is displayed.
7- Press on PGM button to select Prog. 1 ( ) and Hour and Min
buttons to enter 7:30 AM.
8- Press on PGM button to select Prog. 2 ( ) and then Clear button to
erase it.
9- Press on PGM button to select Prog. 3 ( ) and then Clear button to
erase it.
10- Press on PGM button to select Prog. 4 ( ) and then Hour and Min
buttons to enter 11:00 PM.
11- Press on Mode button to exit this function.
a) To program your schedule
1- Press on PGM button to access the programming mode.
2- Press on Day button to select the day to be programmed. You can select
all days of the week by pressing on Day button for 3 seconds.
3- Press on PGM button to select program 1, 2, 3 or 4.
4- Press on Hour and Min buttons to program the time.
5- When you have completed your programming, press on Mode button to exit
this function.
b) To erase a program :
Select the program using PGM and Day buttons, and press on Clear
button. The time field displays --:-- when the program is inactive.
c) Example 1 : Comfort period from 7:00 AM to 10:30 PM
Economy period from 10:30 PM to 7:00 AM
Identical schedule for all days of the week.
1- Press on PGM button to access the programming mode.
2- Press on Day button 3 seconds to select every day of the week.
3- Press on Hour button to enter 7:00 AM, Prog. 1 ( ).
4- Press on PGM button again to select Prog. 2 ( ), and press on
Hour and Min buttons to enter 10:30 PM.
5- Press on Mode button to exit this function.
Programming the time and day
1- Set the time using the Hour and Min buttons.
2- Set the day using the Day button.
Programming the Comfort, Economy and Vacation settings
The Comfort , Economy and Vacation settings respectively represent
the temperatures that you wish to have during the day , at night or while
you are away at work , or while you are away for an extended period .
Schedule programming
The TH111GFCI-P allows 4 setting changes for each day of the week. There are
no pre-set programs.The programs are tailored to perfectly adapt to your life
style. The principle is very simple. For each day, enter the time at which you wake
up (P1), the time you leave for work (P2), the time you arrive back home (P3) and
the time you go to bed (P4).
PROGRAMMING
Mode
NOTE : For temperature increases (Prog. 1 and 3), allow at least
15 minutes per °C. If you have lowered the temperature by
3 °C during the night and you wake up at 7 AM, change the
setting at 6:15 AM.
For savings to be obtained, you must lower the temperature for a period of 2 to 3
times the delay required to bring the temperature back to your comfort level.
Example : If your system takes one hour to go from your saving temperature level
to your comfort temperature Ievel, it is useless to lower the temperature for a
period less than 3 hours.
Memory back-up
In the event of a power failure, an internal circuit will maintain the programming
and the time. But only the time could have to be set if power failure is more than
2 hours.
Early Start function
The thermostat is providing a built-in function enabling it to calculate the
optimum time to start the heating system to achieve the desired temperature
setting at the programmed time. This function could start the heating system as
early as 6 hours prior to the programmed time. To enable this function, set the
switch E.S. to “ON” at the back of the thermostat.
Program
1
2
3
4
T
ime
Wake-up time
Leaving time
Return time
Bed time
d) Example 2 : Comfort period: Monday to Friday from 6:15 AM to
8:15 AM and from 5:00 PM to 10:00 PM.
NOTE :
It is faster to program the same schedule for every day and then modify
the exception days.
CHARACTERISTICS
• Model: TH111GFCI-P (240 VAC)
• Supply: 240 VAC, 50/60 Hz
• Load: 16.7 A maximum (Resistive only)
• Power: 4000 watts (NI) @ 240 VAC
• Ground fault circuit interrupter (GFCI): 10 mA TRIP LEVEL
• Approvals: CSA / C, US
• Display range: 0 to 60 °C (32 to 140 °F)
• Setting range: 5 to 40 °C (40 to 104 °F)
• Comfort default setting: 28 °C (82 °F)
• Econo default setting: 18 °C (64 °F)
• Storage: -20 to 50 °C (-4 to 120 °F)
WARRANTY
AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY
This product is warranted against material defects and workmanship in normal
use for a period of one year, from the date of the original purchase from author-
ized dealers. During this period, AUBE technologies inc. will repair or replace the
product with a new or of equivalent quality at AUBE'S option, without charge, any
product proven defective in normal use.
Warranty does not cover transportation costs. Nor does it cover a product sub-
jected to misuse or accidental damage. This warranty does not cover the cost of
installation, removal or reinstallation.
This limited warranty is in lieu of all other warranties, obligations or liabilities
expressed or implied by the company. In no event shall AUBE technologies inc.
be liable for consequential or incidental damages resulting from installation of this
product. Some states or provinces do not allow limitations on how long an implied
warranty lasts, or the exclusion or limitation of incidental or consequential dam
-
ages, so the above exclusions or limitations may not apply to you. This warranty
gives you specific legal rights and you may also have other r ights which vary from
state to state.
The defective product and the original sale receipt must be returned to the origi-
nal dealer or shipped pre-paid, insured and addressed to:
Aube technologies inc., 705 Montrichard, Iberville (Quebec),
Canada, J2X 5K8
If you have any questions concerning the installation or programming of this
product, please call our technical assistance at (450) 358-4600 for the Montreal
area or
1-800-831-AUBE for outside area, Monday to Friday between
8:30 AM and 5:00 PM Eastern time.
02/07/02 920-111-022-00-1-A 2/2
To program your settings
a) To program the Comfort temperature, select the desired degree using the
buttons and press the button until the icon is displayed
(app. 3 seconds).
b) To program the Economy temperature, select the desired degree using the
buttons and press the button until the icon is displayed
(app. 3 seconds).
c) To program the Vacation temperature, select the desired degree using the
buttons and press on the and buttons simultaneously
until the icon is displayed (app. 3 seconds).
d) Press the Mode button to exit this function and return to the normal
operating mode.
Schedule/Day
PROG. 1
PROG. 2
PROG. 3
PROG. 4
MON.
6:15
AM
8:15 AM
5 PM
10 PM
TUES.
6:15 AM
8:15 AM
5 PM
10 PM
WED.
6:15 AM
8:15 AM
5 PM
10 PM
THU.
6:15 AM
8:15 AM
5 PM
10 PM
FRI.
6:15 AM
8:15 AM
5 PM
10 PM
SAT.
7:30
AM
---
---
11 PM
SUN.
7:30
AM
---
---
11
PM