Filter
Top Products
TH110 400-110-000-A 2/6/05 2/2
Automatic - The temperature is set according to the energy-saving
schedule. To place the thermostat in this mode, press Mode until is dis-
played. The icons of the current period and preset temperature are also dis-
played.
Temporary Bypass: If you modify the setpoint (by pressing the , ,
or button) when the thermostat is in automatic mode, the new set-
point will be used until the end of the current period. When the next
period starts, the temperature set for that period becomes the new set-
point.
Manual - The energy-saving schedule is not used. The temperature must
be set manually. To place the thermostat in this mode:
n Press Mode until is displayed.
o Set the temperature using the , , or button.
Vacation - The thermostat is set to the Vacation temperature. Press
both and buttons simultaneously to place the thermostat in Vacation
mode.
The schedule consists of 4 periods per day which represents a typical week
day. You can program the thermostat to skip the periods that do not apply to
your situation. For example, you can skip periods 2 and 3 for the weekend.
The Comfort ( ) temperature is used in periods 1 and 3 and the Economy
( ) temperature is used in periods 2 and 4. For example, when the period
changes from 1 to 2, the setpoint automatically changes from Comfort setting
( ) to Economy setting ( ).
You can have a different program for each day of the week; i.e., each period
can start at different time for each day of the week. The thermostat has been
programmed with the following schedule.
To modify the schedule:
n Press Pgm to access the programming mode. Period 1 is selected.
o Press Day to select the day to program (hold for 3 seconds to select the
entire week).
p Press Hour and Min to set the start time of the selected period, or press
Clear if you want to skip the period (--:-- is displayed).
q Press Pgm to select another period, or press Day to select another day.
Then repeat step 3.
r Press Mode to exit the programming mode.
NOTE: If no button is pressed for 60 seconds, the thermostat will automati-
cally exit the programming mode.
Power: 240 Vac, 50/60 Hz
Load: 16.7 A maximum (resistive only)
Power: 4000 watts (NI) @ 240 Vac
Display range: 0°C to 60°C (32°F to 140°F)
Display resolution: 0.1°C (0.1°F)
Setpoint range: 5°C to 30°C (40°F to 86°F)
Setpoint interval: 1°C (1°F)
Storage: -20°C to 50°C (-4°F to 120°F)
Approvals: CSA/UL
Data backup: In the event of a power failure, most settings are saved. Only
the time must be re-adjusted if the power failure lasts more than 2 hours. The
thermostat will return to the mode that was active prior to the power failure.
Aube warrants this product, excluding battery, to be free from defects in the workmanship or materials,
under normal use and service, for a period of three (3) years from the date of purchase by the
consumer. If at any time during the warranty period the product is determined to be defective or
malfunctions, Aube shall repair or replace it (at Aube's option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased
it, or
(ii) contact Aube. Aube will make the determination whether the product should be returned, or
whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown
by Aube that the defect or malfunction was caused by damage which occurred while the product was in
the possession of a consumer.
Aube's sole responsibility shall be to repair or replace the product within the terms stated above. AUBE
SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM
ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS
PRODUCT. Some provinces and states do not allow the exclusion or limitation of incidental or
consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY AUBE MAKES ON THIS PRODUCT. THE
DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE
THREE-YEAR DURATION OF THIS WARRANTY. Some provinces and states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which vary from province or
state to another.
If you have any questions about the product installation or operation, or concerning the
warranty, contact us at:
705 Montrichard
Saint-Jean-sur-Richelieu, Quebec
J2X 5K8
Canada
Tel.: (450) 358-4600
Toll-free: 1-800-831-AUBE
Fax: (450) 358-4650
Email: aube.service@honeywell.com
For more information on our products, go to
www.aubetech.com
s
Operating Modes
6.
t
Energy-saving Schedule
7.
Period Description Associated preset temperature
Wake-up
Away from home
Return home
Sleep
Period Setting
MO TU WE TH FR SA SU
6:00
AM
6:00
AM
6:00
AM
6:00
AM
6:00
AM
6:00
AM
6:00
AM
8:00
AM
8:00
AM
8:00
AM
8:00
AM
8:00
AM
--:-- --:--
6:00
PM
6:00
PM
6:00
PM
6:00
PM
6:00
PM
--:-- --:--
10:00
PM
10:00
PM
10:00
PM
10:00
PM
10:00
PM
10:00
PM
10:00
PM
u
Troubleshooting
8.
Problems Solutions
The thermostat’s screen is blank. The thermostat’s switch is on Standby.
LO is displayed.
The measured temperature is below 0°C
(32°F). Heating is activated.
HI is displayed.
The measured temperature is above 50°C
(122°F).
The wrong time is displayed.
The thermostat was without power for
more than 2 hours.
The measured temperature is wrong.
The thermostat is located in a spot
exposed to an air draft.
The heater is always On. Bad installation
The thermostat indicates that heating is On
but the heater is not On.
Bad installation
The temperature does not change accord-
ing to the energy-saving schedule
Check that the thermostat is in Automatic
mode. Check also the energy-saving
schedule and clock settings.
v
Technical Specifications
9.
;
Warranty
10.
Customer Assistance
11.
As an ENERGY STAR
®
partner, Aube Technologies has
determined that this product meets the E
NERGY STAR
guidelines for energy efficiency.