Filter
Top Products
10
- 9 -
wall strap
wall
(S)
Tool needed(not included)
10- Place wall strap (S) at desired position on the wall. Mark the hole position with a pencil. Drill a hole
Note:Screwing wall anchor into stud is very important in properly securing the stand.
R
Q
(Q) (R)
on the pencil mark made on the wall with a 10mm size Drill Bit. Insert plastic anchor(Q) into the wall.
Fasten the wall strap(S) to the wall by inserting screw(R) through grommet in nylon strap(S) and then
into wall anchor.