Filter
Top Products
44
Access Control Catalog - June 2004
Simplex
®
Simplex
®
900 Series
Light Commercial / Residential Locks
Example
01
9
041
Build the model number with the desired options
Model Options Packaging
9
4
1
Finishes
-
---
-
140 6
2
3
3
⁄4"
(95 mm)
2
9
⁄16"
(65
mm)
1
9
⁄16"
(40
mm)
5
⁄8"
(16
mm)
15
⁄16"
(24 mm)
*
Key override
5
"
(127
mm)
3
11
⁄16"
(94 mm)
1
1
⁄8"
(29 mm)
2
1
⁄16"
(52 mm)
Front Exterior
Side Exterior Side Interior
Back Interior
(Spring latch models)
D
- Installation instructions
- Strike for inswing and outswing doors (appropriate to latch type)
- Full-scale template
- All hardware required for a complete installation
Items supplied with the lock:
Model
41
1 per box
Locks
shipped
12 per case
Packaging
04
Satin Brass
(633) not
available for
model 929
26D
Satin Chrome
(626)
Finishes
Models 902, 904, 906, 910 are auxiliary locks with manual relock. Entry
is by combination, egress is by interior thumbturn. They are deadbolt,
with 1" (25 mm) throw, flat face plate.
902
Door thickness 1
3
⁄8"-1
1
⁄2" (35-38 mm)
904
Door thickness 1
3
⁄4"-2
1
⁄8" (44-54 mm)
906
Door thickness 1
3
⁄8"-1
1
⁄2" (35-38 mm)
Key override
910
Door thickness 1
3
⁄4"-2
1
⁄8" (44-54 mm)
Key override
Models 917, 919, 920, 922, 929, 935, 938 have automatic relock. Entry
is by combination, egress is by interior thumbturn. They have a dead-
locking latch, with
5
⁄8" (16 mm) throw, flat face plate. Model 929 is DOD
compliant.
917
Primary/auxiliary lock
Door thickness 1
3
⁄8"-1
1
⁄2" (35-38 mm)
Latch holdback
919
Primary/auxiliary lock
Door thickness 1
3
⁄4"-2
1
⁄8" (44-54 mm)
Latch holdback
920
Auxiliary lock
Door thickness 1
3
⁄8"-1
1
⁄2" (35-38 mm)
922
Auxiliary lock
Door thickness 1
3
⁄4"-2
1
⁄8" (44-54 mm)
929
Primary/auxiliary lock
Door thickness 1
3
⁄4"-2
1
⁄8" (44-54 mm)
DOD compliance
Face plate shield & padlock clasp included
935
Primary/auxiliary lock
Door thickness 1
3
⁄8"-1
1
⁄2" (35-38 mm)
Latch holdback
Key override
938
Primary/auxiliary lock
Door thickness 1
3
⁄4"-2
1
⁄8" (44-54 mm)
Latch holdback
Key override
Select up to 4 options and insert 0 if less than
4 options required.
0 None
1 Substitutes a surface mounted strike box for
metal door frames in place of the standard
mortise strike box (Part Number 74464)
2 Deletes the key cylinder from key override models.
Recessed escutcheon recommended for standard rim
cylinder installation. Your rim cylinder tailpiece must be
reduced in width to accommodate the tail receptacle.
Specify the position of your cylinder tailpiece
(vertical or horizontal) to mate with your standard
size rim cylinder (not supplied)
3 Substitutes a 2
1
⁄2" (64 mm) lever in place
of the standard inside thumbturn
(Part Number 74437)
4 Master key (Key override model)
5 Adds the panic bar release kit to a spring
latch model (Part Number 74438)
6 Option is now a standard lock model.
Models have spring latch without latch
holdback. See Models 920 and 922 in
Ordering Information
7 Deletes the key cylinder from key override models
and changes gear plate to a 100 Series. Recessed
escutcheon recommended for standard rim cylinder
installation.Your rim cylinder tailpiece must be reduced
in width to accommodate the tail receptacle. Specify
the position of your cylinder tailpiece (vertical or
horizontal) to mate with your standard size rim cylinder
(not supplied)
8 Changes gear plate to accept a horizontal tailpiece
Options