Filter
Top Products
STRIKES
Page 12
5400LN Series Cylindrical Lock
STRIKES
Yale
®
5400LN locksets are supplied standard with a 497 ANSI strike.
A variety of optional strikes are also available. All strikes are located on the same vertical and horizontal
center lines as the latchbolt. Some strikes are available in a variety of lip lengths to accommodate varying
thickness of doors and frames. To determine the proper length of the lip, measure from the center line of the
strike to the edge of the jamb and add 1/4" (6mm). All strikes are reversible.
ATTACHING SCREWS
List No. 497 ANSI Strike
1-1/4" supplied standard with
5400LN. 1-1/8", 1-1/2", and
1-3/4" lip lengths available by
special order. For door and
frames with ANSI A115.2
preparations.
List No. 495 Strike
1-1/4" curved lip, wrought box
supplied. 1", 1-1/2", 1-3/4" and
2" curved lip lengths available
by special order.
List No. 497B Blank ANSI Strike
Available to special order.
Installed in frame with standard
ANSI A115.2 preparation to
replace the strike when the
lockset has been removed from
the door.
List No. 202 Strike Box
Available to special order.
Specify 497 x 202.
For List No. 495
#8-8-32 x 3/4" (19mm) Phillips flat head
combination wood and machine screws.
P/N 81-2012-0416
For List Nos. 497 and 497B
#12-12-24 x 1" Phillips flat head
combination wood and machine screws.
P/N 81-2012-0620
NOTE: When ordering strike or attaching screws individually, specify the finish required; i.e. 497 x 202 x 606.