Filter
Top Products
RECOMMENDED BRINE TANK APPROXIMATE
PIPE SIZE MINERAL TANK SIZE
SALT STORAGE
SHIPPING WEIGHT-TOP MOUNT
MODEL (INCHES) (INCHES) (INCHES) ( LBS) SINGLE TWIN
H200-240 2 24 X 72 24 X 50 715 674 1325
H200-300-24 2 24 X 72 24 X 50 715 776 1529
H200-300-30 2 30 X 72 30 X 50 1,110 1059 2064
H200-450-30 2 30 X 72 39 X 48 2,030 1333 2593
H200-450-36 2 36 X 72 39 X 48 2,030 1393 2653
H200-600 2 36 X 72 39 X 48 1,640 1751 3426
H200-750 2 42 X 72 42 X 60 2,580 2535 4954
H200-900 2 42 X 72 50 X 60 4,130 2922 5750
H200-1200 2 48 X 72 50 X 60 4,130 3600 6900
Mineral tank sizes shown are with polyglass tanks.
RATED CAPACITY FLOW RATES (gpm)
RESIN LOW SALT MEDIUM SALT HIGH SALT BKW
MODEL CU.FT. GRAINS/LBS GRAINS/LBS GRAINS/LBS 15 PSI 25 PSI GPM
H200-240 8 152,000/48 224,000/80 256,000/120 77 100 12
H200-300-24 10 190,000/60 280,000/100 320,000/150 75 97 12
H200-300-30 10 190,000/60 280,000/100 320,000/150 92 120 20
H200-450-30 15 285,000/90 420,000/150 480,000/225 88 113 20
H200-450-36 15 285,000/90 420,000/150 480,000/225 100 130 30
H200-600 20 380,000/120 560,000/200 640,000/300 97 126 30
H200-750 25 475,000/150 700,000/250 800,000/375 106 137 40
H200-900 30 570,000/180 840,000/300 960,000/450 104 130 40
H200-1200 40 760,000/240 1,120,000/400 1,280,000/600 105 135 50
1. Steel tank design congurations available up through 60” tank diameters. Consult factory for details.
OPERATING CONDITIONS
1. Water Pressure 30 - 100 psi.
2. Water temperature is not to exceed 110°F and the unit cannot be subject to freezing conditions. Consult factory for higher water temperature applications.
3. Limit of 2 ppm of Ferrous Iron. Add 3 grains per gallon of hardness for each ppm of iron present.
4. Flex connectors and vacuum breakers are required when using the PolyGlass Composite mineral tanks.
5. Backwash ow rates are calculated at 4 gpm per sq. ft. of bed area and rounded off based on 50ºF water temperature.
H200-300 89.4 86.7 83.1 85.4 24x72 24x50
H200-300-30
86.2 83.5 79.9 82.2 30x72 30x50
H200-450 86.2 83.5 79.9 82.2 30x72 39x48
H200-600 87.2 84.5 80.9 83.2 36x72 39x48
H200-750 104.5 101.8 98.2 100.5 42x72 42x60
H200-900 104.5 101.8 98.2 100.5 42x72 50x60
H200-1200 104.5 101.8 98.2 100.5 48x72 50x60
SYSTEM OUTLET INLET DRAIN MINERAL BRINE
MODEL HEIGHT HEIGHTS HEIGHTS HEIGHTS TANK TANK
H200 Physical Specications
H200 Capacity Ratings
H200 Series Top Mount Dimensions
H200-300-SM 95.6 54.6 51 53.3 24x72 24x50
H200-300-30-SM
94.6 54.6 51 53.3 30x72 30x50
H200-450-SM 94.6 54.6 51 53.3 30x72 39x48
H200-600-SM 95.3 54.6 51 53.3 36x72 39x48
H200-750-SM 100.9 54.6 51 53.3 42x72 42x60
H200-900-SM 100.9 54.6 51 53.3 42x72 50x60
H200-1200-SM 100.9 54.6 51 53.3 48x72 50x60
All dimensions ±2” and are subject to change without notice. Use as reference only.
Call factory for optional tank & dimensional congurations.
Product Improvement designs are subject to change without notice.
SYSTEM OUTLET INLET DRAIN MINERAL BRINE
MODEL HEIGHT HEIGHTS HEIGHTS HEIGHTS TANK TANK
H200 Series Side Mount Dimensions
HELLENBRAND, INC.
404 MORAVIAN VALLEY ROAD
WAUNAKEE, WISCONSIN 53597
(608) 849-3050 • FAX (608) 849-7398
www.hellenbrand.com
12