Filter
Top Products
29” FOR FILTER
REPLACEMENT
1. The air cleaner can be mounted on the right or left side of the HVAC equipment (see Figure 2).
2. The door can be facing the front or rear of the HVAC equipment cabinet (see Figure 2).
3. The door and blanking plate are reversible to allow filter access from the front or rear of the HVAC equipment cabinet
(see Figure 2).
4. Leave sufficient space (29”) for the removal of the filtering media (see Figure 3).
The air cleaner has many features to make retrofit easier:
1. The cold air return opening is adjustable between 8” and 10”. This is done by bending up the appropriate tabs. The 8” dimension
can be offset to the right or left by moving the “L” bracket to either side to match up with the location of the return drop.
FIGURE 2
FIGURE 4 – 8” x 24” OFFSET RIGHT FIGURE 5 – 8” x 24” OFFSET LEFT
10-11481
10-11490
FIGURE 3
10-11483
10-11490
The door and blanking
panel are reversible to
allow filter access from
the front or back.
DOOR
BLANKING
PLATE
LOCATING THE AIR CLEANER
EASY TO INSTALL AIR CLEANER FEATURES
L BRACKET
BEND UP T
ABS
BEND UP T
ABS
L BRACKET
2