Applica LME9000MB Pet Care Product User Manual


  Open as PDF
of 11
 
16
15
Solution:
PressON/OFFbutton
OFFandcheckthefollowing:
Important:WhentheOn/OffbuttonisintheOffpositionitonlydisablesthe
rakefunction.
1.TheACadapterplugisinsertedfullyintotheinputjack.
2.Thepoweroutletisoperating.(youmaywishtodouble-checkbyplugging
unitintoanotheroutlet).
3.Waitafewsecondsandturnunitonagain.Greenlightshouldcomeon
andtheunitshouldperformacompletecleaningcycle.
4.Ifunitstilldoesnotoperate,
pressON/OFFbutton
OFFandunplugtheAC
adapter.
5.Operatetheunitonbatterypoweronly.
Wasteclumpsadheretothesurfaceofthelittertray.
ProbableCause:
• Soiledlittertraysurface
Solution:
(Werecommendwearingrubberorlatexgloveswhenhandlingwaste).
1.Removeclumpswithscoopanddumplitterintoanothercontainer.
2.Removelittertray(referto"CareandCleaning"inthisuseandcarebook),
cleanwithmilddetergent,rinseanddry.
3.Spraylittertraysurfacewithnonstickcookingsprayorsiliconespray,and
wipewithasoft,drycloth.Thiswillhelptopreventwasteclumpsfrom
adheringtothesurfaceofthetray.Waituntiltrayiscompletelydryand
assembleunitagain.
PowerlightfailstocomeonwhenON/OFFbuttonispressedON.
Important:WhentheOn/OffbuttonisintheOffpositionitonlydisablesthe
rakefunction.
ProbableCause:
• Poweroutageorbatteriesareincorrectlyinstalledordead.
Solution:
1.
PressON/OFFbutton
OFFthenbackON.
2.Makesurethereispowertotheunitand/orfreshbatteriesarecorrectly
installed.
Unitdoesnotcompletelycleanlitterbox.
ProbableCause:
• Low-qualitylitter.
Solution:
1.Donotusenon-clumping,crystalorpearl-likelitter.
2.Useonlyhardclumpinglitter.
UnitdoesnotoperatewhenyoupressON/OFFbuttontoturnunitON.
Important:WhentheOn/OffbuttonisintheOffpositionitonlydisablesthe
rakefunction.
ProbableCause:
• Poweroutage
• Faultyornon-activatedoutlet
• Oldbatteries
Solution:
• Checkbatteriesandoutlet
• Usebatteriesincaseofpoweroutage
• Switchtobatterypower
ProbableCause:
• Incorrectlyinstalledordeadbatteries.Changethebatteriesonceyearly
(batteriesshouldonlybeusedasbackup).
Solution:
1.
PresstheON/OFFbutton
OFF.
2.Openbatterycompartment;checktoseethatbatteriesarecorrectly
installed.
3.
PresstheON/OFFbutton
ON.Theunitshouldperformawholecleaning
cycle.
4.Ifunitdoesnotoperate,replacebatterieswithfreshonesandtryagain.
5.Ifunitdoesnotoperatewithfreshbatteries,tryitwiththeACadapter.
6.Greenlightshouldcomeon.Ifitdoesnot,thereisaproblemwiththe
ACadapterorbatteries.
ProbableCause:
• ACadapterdoesnotwork
 previous next