Filter
Top Products
Sensors
Sensors (located on interior side panels) must be kept clean.
Wipe sensors with a soft, dry cloth to keep them dust free (U).
10
9
Installrake
12. Align tracks on back of rake (each end) and slide into
grooves on motor housing (R).
13. Remove the AC adapter from where it is packed in the
styrofoam and plug it into the unit (S).
• Plug the cord into a standard electrical wall outlet.
• Press the ON/OFF button to turn unit ON. The rake will
automatically run through its first cleaning cycle and smooth
out the litter.
14. If the LitterMaid Kitty Kabana
™
litter box cover is not being used, place
the 4 tent plugs into the 4 holes on top housing.
Note: Always use both hands to move LitterMaid
®
litter box by holding handle
cutouts located on each side of the tray.
IonicAirCleaner
• As soon as the cat leaves the litter box, the sensor activates the 10-minute
countdown and the ionic air cleaner.
• The ionic air cleaner stays on during the countdown and the cleaning cycle.
OptionalItems:
For more information, call: 1-800-738-0245 or visit our website,
www.littermaid.com.
LitterBoxCarpet
• Place the assembled unit on the carpet.
LitterMaidKittyKabana
™
litterboxcover
• Assemble to cover unit (T). (See instruction sheet.)
HelpfulInformation
If you need to acclimate your cat to the LitterMaid
®
Advanced Automatic
Self-Cleaning litter box, refer to "Acclimating Your Cat" in this use and care book.
If your unit is not working properly, refer to "Troubleshooting" in this use and care
book.
Batteries (we recommend using batteries only as a back-up):
• Push up on center ridges to open battery compartment door.
• Remove the battery door.
• Follow the diagram in the compartment to install 8 AA Alkaline cell batteries.
(Batteries not included.)
Just as your alarm clock continues to run on batteries if there is a power failure,
the LitterMaid
®
litter box will continue to operate as long as batteries are
installed. Change the batteries periodically.
S
T
LEDoperation,functionandwhytheyblink:
Greenpowerlightindicator Power LED indicator is lit when power to the unit
is on.
Blinkinggreen LED blinks (2 times per second) indicating
batteries are low.
LED blinks (1 time per second) when the rake
assembly has encountered a blockage.
Greenonionizer Ionic air cleaner LED (behind the rake) is only
lit when the ionizer is operating.
ACCLIMATINGYOURCAT
If your cat needs to acclimate to the new LitterMaid
®
Advanced Automatic
Self-Cleaning litter box, follow these instructions.
• Place the LitterMaid
®
unit next to your old litter box.
• Set it to run automatically by pressing the ON/OFF button ON.
• Do not clean out the old litter box. (Cats prefer to use a clean box, and the
LitterMaid
®
litter box will always be clean.)
• If your cat is shy, do not operate the LitterMaid
®
litter box automatically
for 2 to 3 days. (Press the ON/OFF button OFF.)
• Manually activate the LitterMaid
®
litter box 2 to 3 times a day for the first
2 to 3 days, to let your cat get used to going into the LitterMaid
®
litter box,
before you set it to clean automatically.
• As soon as your cat is acclimated to the LitterMaid
™
litter box, set it to clean
automatically. Press the ON/OFF button ON and remove the old litter box.
Note: Do not place your LitterMaid
®
litter box in a wet environment or in direct
sunlight. Donotuseoutdoorsoronpatios.
U
R