Filter
Top Products
Apple Cinema Display Stand -
5
Installing the Replacement Display Stand
1. Route the display cable through the opening in the replacement stand.
2. Place the replacement stand on the mounting bracket.
3. Install the screws.
4. Place the display upright.
5. Check the operation of the stand. The display panel should tilt up and down smoothly.
Warning: Never turn on a display unless all of its parts are in place as originally
assembled. Operating the display with missing parts can damage the display
and cause injury.
Apple Computer, Inc.
© 2004 Apple Computer, Inc. All rights reserved.
This document is protected under U.S. Copyright Law and International Treaties, and no
part of this document may be reproduced in any form without written permission from
Apple.
Apple is not responsible for typographical, printing, or inadvertent errors.
Apple Computer, Inc.
1 Infinite Loop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
Apple and the Apple logo are trademarks of Apple Computer, Inc., registered in the U.S.
and other countries.