Filter
Top Products
InRow SC Operation16
Run hours
Path: Main > View Run Hours
The cooling unit records the number of hours each of its components has operated. When a component is
replaced, use the Reset option to reset the run hours for the displayed component to zero.
Path: Main > View Run Hours > Air Filter
• Air Filter
• Reset Run Hours
Path: Main > View Run Hours > Fans > Condenser
• Fan n (n = 1, 2, or 3)
• Reset Run Hours
Path: Main > View Run Hours > Fans > Evaporator
• Fan n (n = 1, 2, or 3)
• Reset Run Hours
Path: Main > View Run Hours > Compressor
• Compressor
• Reset Run Hours
Path: Main > View Run Hours > Condensate Pump
• Conds Pump (Condensate Pump)
• Reset Run Hours
Path: Main > View Run Hours > Fan Power Supplies
• LT Fan PS (Left Fan Power Supply)
• RT Fan PS (Right Fan Power Supply)
• Reset LT PS Hours (Reset Left Fan Power Supply Hours)
• Reset RT PS Hours (Reset Right Fan Power Supply Hours)
Thresholds
Set alarms to alert you when components require service or there are high temperature violations.
Path: Main > Set Unit Thresholds
When the air temperature exceeds the temperature defined by the High Temperature Threshold, an
alarm will occur. Set High Temperature Thresholds for the following:
• Rack Inlet: An alarm condition exists when the temperature of the air entering the rack at the rack
inlet sensor exceeds the threshold.
• Supply Air: An alarm condition exists when the temperature of the air output from the cooling
unit exceeds the threshold.
• Return Air: An alarm condition exists when the temperature of the air entering the cooling unit at
the temperature sensor exceeds the threshold.