APC ACPSC2000 Air Conditioner User Manual


 
InRoom SC 60 Hz User Manual18
Set Timer changing settings: With the cooling unit ON,
1. - Select the mode and press Send.
2. - Select the fan speed and press Send.
3. - Adjust the temperature between 16°C and 30°C and press Send.
4. - Press the Timer button to see the remaining hours.
5. - Press the Hour button to adjust the delay time. Press Send.
Clear the Timer: Press and hold the timer button until the time of day appears in the display.
Press Send.
Sleep mode. While the cooling unit is On, set the mode, temperature and fan speed. Press the Hour
button to set the duration of Sleep mode. Sleep mode timer operation can be set for up to seven hours.
Press the Send button. Press the Sleep button to start the sleep operation. If the cooling unit is in Sleep
mode, pressing the Sleep button will cancel Sleep mode.
Battery Care
The remote control requires two AAA (IEC R03) 1.5V batteries (not included).
Remove the cover on the back of the remote control and insert the batteries with the (+) and (-) poles
pointing in the proper direction.
Caution: Use only AAA (IEC R03) 1.5V batteries. Do not use rechargeable batteries.
Caution: Replace both batteries at the same time.
Caution: Dispose of used batteries appropriately.
+
+
-
-
na3361b