Filter
Top Products
Indoor/Outdoor Lens – reduces glare and bright light
The Indoor/Outdoor Lens tones everything down and provides excellent vision in both indoor
and outdoor lighting.
• Good for applications where working both indoors and outdoors is required.
• Allows people to wear the same pair of eyewear in both indoor and outdoor environments
• The AOSafety Ultimate Indoor/Outdoor Mirror lens is the only Indoor/Outdoor lens that reduces
backside reflection – so workers won’t complain about seeing the reflection of their eyes on the
backside of the lens, which is not only distracting but common with other Indoor/Outdoor lenses.
Lexa MinimIzeR™ Lens – reduces infrared (I.R.) with excellent UV absorption
Use in low light welding applications.
• Developed specifically for people around low light welding applications.
• Helps protect against some infrared radiation
• Helps protect against “flash burn”, a common and damaging hazard that occurs when workers are
exposed to welding arcs.
• The neutral gray color of the MinimIzeR lens has a high visible transmittance of 50%, resulting in
excellent visual acuity
• Solves color recognition problems that are encountered with green shaded lenses (most other
welding eyewear are an unattractive dark green/pea green color).
Arc-Block™ Lens – protects against accidental electrical arc (UV and I.R.)
Designed especially to provide protection to linespeople and utility workers from the eye hazards of
accidental electrical arc.
• Protects against UV and “flash burn”
• Absorbs Infrared (I.R.) to a level equal to a Shade 2.5 lens
• Provides the best possible protection and visible acuity given the fact that the usual eye protection
device used in work environments that involve accidental arcing is a spectacle
• Provides better color recognition than green shaded lenses
AOSafety Clear Lens – protects against UV
General-purpose safety glass.
• Provides maximum visual acuity and maximum color recognition
GlareX™ Polarized Lens – protects against reflected glare
Designed for outdoor use where reflected glare from water, snow, cement, and other hard
surfaces exists.
• Protects against UV
• Provides good color recognition
• Outdoor applications only
Sodium Blue Lens-reduce glare and bright light
Developed to be used in semiconductor fabrication, photolithography and similar industries where
there is a medium to high levels of yellow incandescent/fluorescent lamps, or high and low pressure
sodium vapor lighting.