Filter
Top Products
1 Pressure reducing valve
3 T&P valve
4 Stop valve
5 Non-return valve
6 Circulation pump
7 Destrati cation pump
9 Drain valve
10 Gas cock
11 Isolating valve
12 Temperature gauge
14 Hot water outlets
15 Expansion relief valve
16 Expansion vessel
17 Three way valve
18 Water tank
19 Float valve
A Cold water
B Hot water
C Return circulation
D Gas supply
E Overfl ow pipe
H Expansion vent pipe
A.O. Smith unvented system kits utilise combination valves.
An ADM/ADMP or ADMR water heater should be installed
in accordance with local standards and ventilation require-
ments (category B11BS).
Further installation and connection details can be found in
the Installation & Commissioning Manual.
ADMP / ADM / ADMR
Installation diagrams ADM / ADMR
Vented
Unvented