Filter
Top Products
2
Antari Fog Cooler
Congratulations on the purchase of your new
ANTARI FOG COOLER
Introduction
Thank you for choosing the ANTARI Fog Cooler. You now own a rugged and
powerful state-of-the-art machine. Prior to use, we suggest that you carefully read all
of the instructions. By following the suggestions found in this user manual, you can
look forward to the reliable and satisfactory performance of your ANTARI Fog Cooler
for years to come.
Please follow these operation, safety and maintenance instructions
to ensure a long and safe life for your fog cooler.
Pay attention to all warning labels and instructions printed on the exterior of your
ANTARI Fog Cooler
♦ Ideal operating temperature is 10 - 30 degrees Celsius.
♦ After moving or transporting this unit, wait five minutes before operating.
♦ Input fog must be clean. Contaminated fog may damage internal parts.
♦ There must be a free air space of at least 15 cm (6 inches) between the fog
cooler intake and the fog machine output.
♦ After interrupting operation, wait three minutes before starting again.
♦ Keep this device dry.
♦ For inside use only. Not designed for outside use.
♦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use
take care to determine that the unit is installed at the rated voltage.
♦ Keep fog cooler upright. Do not tilt this device. Angle of inclination may not
exceed 10 degrees.
♦ Turn off or unplug when not in use.
♦ This machine is not water- or splash-proof. If moisture, water, or fog liquid gets
inside the housing, immediately unplug the unit and contact a service technician
or your ANTARI dealer before using it again.
♦ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified
service personnel.
♦ For adult use only. Fog cooler must be installed out of the reach of children.
Never leave the unit running unattended.
♦ Locate the fog cooler in a well-ventilated area. Never cover the unit’s vents. The
fog cooler is best installed 1 meter away from all objects.
♦ Use only ANTARI FLR Fog Liquid.
♦ If your ANTARI Fog Cooler fails to work properly, discontinue use immediately.
Pack the unit securely (preferably in the original packing material) and return it to
your ANTARI dealer for service.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the
system has arrived intact. Refer to the ”Features” section for information on what