Filter
Top Products
4
2. Wireless Control:
DMX / DIP Switch Section
For wireless control set DIP switch no. 10 to position ON.
At first, the wireless remote control must be registered with the machine.
When the fan is powered on, the LED indicator on the control panel will flash for about 15
seconds. Within this period, press button A on the remote control to register it with the
machine.
It is possible to register up to 5 remote controls with a machine at the same time. When
registered, a remote control can control an unlimited number of machines in parallel.
W-1 Wireless Remote Control
Button A on the remote control allows for incremental adjustment of the fan speed: first
Button B stops the fan.
Each time a button is actuated, the LED indicator on the control panel will flash once to
indicate proper signal transmission.