Filter
Top Products
Product Information
3
V
SS2 Video Sync Sensor
Specifications
The table below lists the specifications for the VSS2 Video Synch Sensor.
Specifications
Power Supply 12 VDC at 20 mA
Power Consumption 2.4 W maximum
Sensitivity • Video - 800 mV (typical), 5V (max)
• Sync - 15.75 kHz
• Sensing - 1 kHz to 3 MHz (200 mV rms minimum), 3 MHz to 20 MHz (600 mV
rms minimum), and 20 MHz to 75 MHz (750 mV rms minimum)
• RGB Sensing - Sync on Green, Horizontal Sync
• Output - Open collector with internal pull-up to 5 volts and solid-state logic
low when sync is present.
Front Panel • Power - Green LED indicator
• Sense 1 - Red LED lights when signal is within sensing range
• Sense 2 - Red LED lights when signal is within sensing range
Rear Panel • Video 1 - RCA jacks for OUT and IN
• Video 2 - RCA jacks for OUT and IN
• Sense Out 1 and 2 - 4-pin Phoenix connector
• 12 VDC-2-pin Phoenix connector
• Delay - None (input connected directly to output)
Enclosure Metal with black matte finish
Dimensions (HWD) 1.5" x 5.09" x 5.27" (3.81 cm x 12.93 cm x 13.39 cm)
Weight 6.70 oz (189.94 g)
Included Accessories • One 4-pin cable connector
• One 2-pin power connector
Optional Accessories • 12 VDC power supply, 20 mA minimum
• AC-RK Accessory Rack Kit