AMX MVP-KS Indoor Furnishings User Manual


  Open as PDF
of 2
 
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
036-004-2771 5/05 ©2005
AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-5965-12
REV: D
Unsecuring the MVP panel from the MVP-KS
1. Place a soft cloth onto a level surface.
2. Carefully place the MVP panel atop the cloth in order not to scratch
the panel during the removal process.
3. Pull upwards on the MVP latch release lever (located below the
kickstand’s AMX logo) to release the "grip" on the MVP’s metallic
plate (FIG. 5).
4. Pull off the MVP-KS from the back of the MVP panel.
5. Carefully grasp both sides of the MVP panel and rotate the entire unit
over back onto the level surface.
FIG. 5
Releasing the MVP from the MVP-KS
Rubber gripping
strip
MVP latch
release lever
 previous