Filter
Top Products
-20-
9. WIRING ALL DIAL CONTROL MODELS
(EXCEPT RTR MODELS)
Dial Control models utilize a standard dry-contact aquastat with capillary temperature sensor. The dial control contains a
make-and-break switch and is suitable for 24V or 120V, 25A Max.
To wire Dial Control models, select the appropriate diagram from the following pages. If a suitable diagram is not available for
your application, please contact AMTROL Tech Support at (401)535-1216. Always disconnect power before wiring the control.
Ensure that the proper conduit and connectors are used per your local code. In lieu of local code, the National Electric Code
should be followed.
CAPILLARY TUBE
SENSOR BULB
SHAFT
WIRE LEADS
SEPARATE CIRCULATOR SEPARATE CIRCULATOR