American Standard 6310B Indoor Furnishings User Manual


  Open as PDF
of 2
 
HD-63
© 2008 AS America, Inc.
EASY TOUCH
SINGLE CONTROL KITCHEN FAUCET
WITH PULL-OUT SPRAY
MODEL NUMBER:
6310B Kitchen Faucet with Pull-out Spray
Escutcheon plate (use is optional). Bone finish.
PRODUCT FEATURES:
Oversize Button: Switches water flow from stream to spray
with just a touch.
Durable WhisperGlide Hose: For smooth, quite operation.
Easy to Install: Flexible supply hoses are factory-installed
for fast hook-up.
Ideal for Granite and Other Solid Surfaces: Mounts
without deck plate for single hole installation
Ceramic Disc Valve Cartridge: Provides a lifetime of
smooth handle operation and drip-free performance
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold to reduce the risk of
accidental scalding
Lifetime Warranty: On function & finish
SUGGESTED SPECIFICATION:
Single control kitchen pull-out faucet shall feature a swivel pull-out spray spout with two check valves, WhisperGlide™ hose,
metal escutcheon plate and handle. Shall also feature washerless ceramic disc valve cartridge with integral hot limit safety stop
and flexible supply hoses. Faucet shall be American Standard Model # 6310B.
6310B
Pull-out kitchen faucet. Bone finish.
GENERAL DESCRIPTION:
Metal body, handle, and escutcheon plate. Swivel pull-out
spray spout. Adjustable spray pattern with push button
activation. Washerless 47mm ceramic disc valve cartridge
with integral hot limit safety stop. Braided flexible supply
hoses with 3/8" compression connections. Brass mounting
shank with brass fixation ring. Complete with two integral
check valves. 2.2 gpm/8.3L/min. maximum flow rate. Fitting
can be mounted with or without escutcheon plate (escutcheon
size 10"L x 2-3/4"W).
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
150mm
(6)
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B125
Product
Number
Description
207mm
(8-1/8)
508mm
(20)
224mm
(8-7/8)
127mm
(5)
232mm
(9-1/8)
254mm
(10)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
35 to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING
HOLE
57mm(2-1/4)
with escutcheon
76mm(3)
less escutcheon