American Standard 38 Indoor Furnishings User Manual


  Open as PDF
of 2
 
G20
© 2008 AS America Inc.
7196.803/804/805 Top Mount
Undercounter Mount
NOTES:
*
TEMPLATE PROVIDED WITH MOUNTING KIT 791001-100 FOR
EXPOSED FAUCET DECK OR UNDERCOUNTER FAUCET DECK
COUNTERTOP CUTOUT VARIATIONS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
NOTES:
*
COUNTERTOP CUTOUT 527mm x 933mm x 25mm RADIUS
(20-3/4 X 36-3/4 WITH 1" RADIUS) AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
3-1/2"
(89mm)
DIA.
2-1/8"
(54mm)
2"(51mm)
OPTIONAL
FINISHED WALL
OR SPLASHBACK
7-7/8"
(200mm)
8-1/8"
(206mm)
1-1/2" (38mm) DIA.
HOLES TYP.
C/L
3/16"
(5mm)
12-1/4"
(311mm)
11-1/8"
(283mm)
19"
(483mm)
38"
(965mm)
9-1/8"
(232mm)
5-3/4"
(146mm)
SEALING
COMPOUND
7-1/8"
(181mm)
36" (914mm)
SUGGESTED
FINISHED
FLOOR
COUNTERTOP
(BY OTHERS)
22"
(559mm)
*CUTOUT NOTE
7196.804
4 HOLE
7196.805
5 HOLE
1-1/2"
(38mm)
RAD.TYP.
1-1/2 O.D. TAILPIECE
5-3/4"
(146mm)
4"(102mm)
4" (102mm)4" (102mm) 4" (102mm)
1/2"
(13mm)
3/16"
(5mm)
4"(102mm)
4"(102mm)4"(102mm) 4"(102mm)
2" (51mm) OPTIONAL
FINISHED WALL
OR SPLASHBACK
7-7/8"
(200mm)
8-1/8"
(206mm)
1-1/2"
(38mm) DIA.
HOLES TYP.
C/L
SEALING
COMPOUND
FINISHED FLOOR
COUNTERTOP
(BY OTHERS)
*
CUTOUT
NOTE
7196.804
4 HOLE
7196.805
5 HOLE
1-1/2" O.D.
TAILPIECE
MOUNTING CLIP
(SEE DETAIL)
DETAIL OF MOUNTING CLIP
(KIT No.791001 -100)
BRASS INSERT
3/4
"
MIN.
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
CLIP
MACH.
SCREW
SINK
3-1/2"
(89mm)
DIA.
2-1/8"
(54mm)
12-1/4"
(311mm)
11-3/16"
(284mm)
19"
(483mm)
38"
(965mm)
22"
(559mm)
1-1/2"
(38mm)
RAD.TYP.
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
5-3/4"
(146mm)
9-1/2"
(241mm)
7-1/2"
(191mm)
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
®
Revised 2/08
 previous