Filter
Top Products
COLONY SOFT
2175.503
Turn off hot and cold water
supplies before beginning.
CAUTION
1
Certified to comply with ANSI A112.18.1
Installation
Instructions
Single Control Lavatory Faucet
with Speed Connect™ Drain
INSTALL FAUCET
Adjustable Wrench Screwdriver Channel Locks
Recommended tools
Tubing Cutter
Congratulations on purchasing your American Standard faucet with the
Speed Connect drain, a feature found only on American Standard faucets.
Speed Connect Drain*
• 1/3 of the parts, installs in 1/3 of the time
• No tools needed
• Never needs adjustment
• Guaranteed to seal properly the first time, every time.
*Your new American Standard faucet is designed to work only with the Speed Connect drain.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
Fig. A.
Fig. B.
1
Plumbers' Putty or Caulking
(HAND TIGHTEN)
3
1
2
4
3
Insert FAUCET (1) and CABLE CONNECTOR (2) through center hole
of mounting surface. Fig. A.
From under side of mounting surface thread the two MOUNTING
NUTS (2) onto FAUCET SHANKS (4). Fig. B.
Center FAUCET (1) and hand tighten MOUNTING NUTS (3) to
secure FAUCET (1).
Apply a bead of putty along the edge of the underside of the FAUCET (1).
PUTTY
M968882 Rev. 1.3