American Standard 0355.034 Indoor Furnishings User Manual


  Open as PDF
of 4
 
M22
© 2008 AS America Inc.
Revised 9/04
102 mm
(4)
152 mm
(6)
152 mm
(6)
86 mm
(3-3/8)
203 mm
(8)
8 mm
(5/16)
464 mm
(18-1/4)
FINISHED
WALL
(6) 25mm (1") DIA.
ACCESS HOLES
FOR CONC. ARMS
102 mm
(4)
79 mm
(3-1/8)
425 mm
(16-3/4)
44 mm
(1-3/4)
38 mm
(1-1/2)
10mm (3/8)
DIA. ANCHOR
SCREW HOLES
206 mm
(8-1/8)
787mm (31)
864mm (34)
FINISHED
FLOOR
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
25 mm
(1)
267 mm
(10-1/2)
114 mm
(4-1/2)
27mm X 14mm
(1-1/16 x 5/16) SLOTS
S-9 HANGER
25mm (1-3/8) DIA.
PUNCHING
521 mm
(20-1/2)
13 mm
(1/2)
44mm (1-3/4) DIA.
STD. OUTLET
0356.421 SINGLE CENTER HOLE FOR WALL HANGER
OR CONCEALED ARMS
0356.137 SINGLE CENTER HOLE FOR WALL HANGER OR
CONCEALED ARMS WITH EXTRA RIGHT HAND HOLE
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY
OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
LAVATORY DESIGNED TO MEET ADA HANDICAPPED
GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34")
ABOVE FINISHED FLOOR.
LUCERNE™
WALL-HUNG LAVATORY
VITREOUS CHINA
102 mm
(4)
152 mm
(6)
152 mm
(6)
86 mm
(3-3/8)
54 mm
(2-1/8)
203 mm
(8)
8 mm
(5/16)
464 mm
(18-1/4)
FINISHED
WALL
(6) 25mm (1") DIA.
ACCESS HOLES
FOR CONC. ARMS
102 mm
(4)
79 mm
(3-1/8)
425 mm
(16-3/4)
44 mm
(1-3/4)
38 mm
(1-1/2)
10mm (3/8)
DIA. ANCHOR
SCREW HOLES
206 mm
(8-1/8)
787mm (31)
864mm (34)
FINISHED
FLOOR
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
25 mm
(1)
267 mm
(10-1/2)
165 mm
(6-1/2)
114 mm
(4-1/2)
27mm X 14mm
(1-1/16 x 5/16) SLOTS
S-9 HANGER
25mm (1-3/8) DIA.
PUNCHING
521 mm
(20-1/2)
13 mm
(1/2)
44mm (1-3/4) DIA.
STD. OUTLET
102 mm
(4)
152 mm
(6)
152 mm
(6)
86 mm
(3-3/8)
54 mm
(2-1/8)
203 mm
(8)
8 mm
(5/16)
464 mm
(18-1/4)
FINISHED
WALL
(6) 25mm (1") DIA.
ACCESS HOLES
FOR CONC. ARMS
102 mm
(4)
79 mm
(3-1/8)
425 mm
(16-3/4)
44 mm
(1-3/4)
38 mm
(1-1/2)
10mm (3/8)
DIA. ANCHOR
SCREW HOLES
206 mm
(8-1/8)
787mm (31)
864mm (34)
FINISHED
FLOOR
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
25 mm
(1)
267 mm
(10-1/2)
165 mm
(6-1/2)
114 mm
(4-1/2)
27mm X 14mm
(1-1/16 x 5/16) SLOTS
S-9 HANGER
25mm (1-3/8) DIA.
PUNCHING
521 mm
(20-1/2)
13 mm
(1/2)
44mm (1-3/4) DIA.
STD. OUTLET
0356.115 SINGLE CENTER HOLE FOR WALL HANGER OR
CONCEALED ARMS WITH EXTRA LEFT HAND HOLE
BARRIER FREE
 previous