Filter
Top Products
Inner Blanket
1. Fold the ends of the old Inner Blanket
in and remove it from the unit.
2. Insert the new Inner Blanket inside the
HEPA filter with the edges overlapped by
at least one inch. Once it is in position
press the Inner Blanket tightly against the
inner screen until the ends butt together.
V.O.C. Cartridge (OPTIONAL)
The V.O.C. Cartridge is used in place of
the Inner Blanket.
1. Carefully slide the V.O.C. Cartridge
into the HEPA filter. Do not drop it as it is
heavy and may damage the unit.
Closing the cabinet
1. Position the bottom cover on the unit
with the child-proof access screw hole
at the rear of the unit.
2. Replace the buttons by applying firm
pressure to the bottom cover to align
the holes and insert the buttons.
3. Replace the child-proof access screw.
Plug the unit in and turn it on.
FILTER REPLACEMENT INSTRUCTIONS
Opening the cabinet
1. Turn the unit off and unplug it.
2. Remove the child-proof access screw
at the back near the bottom of the unit.
Do not discard it as you will need it later.
3. To remove the eleven buttons located
around the bottom edge, press down on
the bottom cover. At the same time,
press against the perforated screen
directly below a button. The button will
pop out slightly. Pull the button out all
the way. Repeat for all eleven buttons.
Once all eleven buttons are out, remove
the metal cover.
Pre-filter
1. Lift the complete filter cartridge
assembly from the unit. Remove and
discard the carbon prefilter.
2.Wrap the new prefilter around the
HEPA cartridge completely enclosing it.
Peel off the adhesive strip backing and
press the filter together to seal it.
3. Put the filter cartridge back in the unit
with the O-ring placed between the filter
and the bottom cover..
HEPA filter
1. Remove and carefully discard the old
HEPA cartridge.
2. Insert a new HEPA cartridge, complete
with new Pre-filter and Inner Blanket.
3. Place a new O-ring seal in the outer
groove in the top of the HEPA cartridge.
If the O-ring appears too big, pinch it in
several places until it fits in the groove.
Thank you for purchasing an Amaircare
®
portable air filtration system.
With proper care and maintenance, your Amaircare
®
system will provide
many years of reliable service, improving the quality of your air.
INSTALLATION
1. Place the unit in the area where you want the cleanest air.
2. Plug the unit into a grounded outlet. The cord has either a 110V or a
220V plug depending on the area in which the unit was sold.
3. Turn the unit on by rotating the control dial until you hear or feel it click.
The unit will start on the “HIGH” position. To reduce the airflow continue
to rotate the control dial clockwise.
4. To turn the unit off, rotate the control dial counter-clockwise passed the
“HIGH” position until you hear or feel the click.
CAUTION
1. Make sure the cord is not in the path of people walking or where
anything can be rolled over it.
2. Do not place any objects on top of the unit or allow anyone to sit on it.
3. NEVER place any liquids or plants on the unit. Moisture could leak into
the unit and damage the filter media or electrical components.
4. The air filtration system discharges the cleaned air through the vents
near the top on two of the six sides. On “HIGH” the velocity of the
air coming out is high to enhance circulation throughout the area
being cleaned. If the airflow is bothersome or creates a draft, turn the
unit until the air is directed toward an unoccupied area of the room.
NOTE: You may notice a slight “new” smell from the unit when your first
turn it on. This is normal and harmless and will dissipate within a few days.
THREE-STAGE FILTRATION
STAGE 1: Prefilter
Removes large particulates
and odors. Extends the life of
the HEPA filter.
STAGE 2: HEPA filter
99.97% efficient @ 0.3 microns.
Removes dust, pollen, bacteria,
animal dander, attached virus-
es, cigarette smoke, radon
daughters and more.
STAGE 3: V.O.C. filter
Removes odors and hazardous
chemicals that may off-gas
from cleaners, paints, solvents,
carpets, furniture and other
items containing synthetic
materials.
OPTIONAL V.O.C. CARTRIDGE FOR
HEAVY-DUTY REMOVAL OF GASES
AND ODORS