Filter
Top Products
9
This portable AC features the
Innovative AutoDrain NanoMist Technology
™
Very little excess water should accumulate. During the process of
cooling, some of the water accumulated is actually used to cool the
unit internally, making it run more effi ciently. Both this evaporative
technology and Innovative AutoDrain NanoMist Technology™ are
features not found in most portable air conditioners.
Switch off the unit and remove the plug from the outlet.
• Position a fl at container or dish on the fl oor under the drain hole.
Do not allow the water to drip continuously into the
container as it might easily overfl ow.
• Remove the drain knob.
• Remove the rubber plug, the water will fl ow in the
container. When this is nearly full, replace the plug to
stop the water fl ow and empty it. Repeat this process
until all water has been removed.
• Replace the rubber plug into the drain hole fi rmly,
the
WATER FULL LED should not fl ash any longer.
• Replace the drain knob.
Rubber plug Drain knob
Emptying The Water Container