Amcor PLDA Electric Heater User Manual


 
2
GB
PARTS
ELECTRICAL CONNECTION - UK ONLY
a. Carbon filter
b. Scent emitter
c. Adapter for d.
d. Spot dehumidification hose
e. Drain tube
f. 3M HAF filter (optional)
a
b
c
d
e
f
For your safety please read the following information.
Warning: This appliance must be earthed.
This appliance operates from a 3 pin 13 amp plug. The voltage rating is 230 volts and should
be protected by a 13 amp fuse either in the plug or distribution board.
The appliance is supplied with a moulded 13 amp 3 pin mains plug fitted with a 13 amp fuse.
Should the fuse require replacement, it must be replaced with a fuse rated at 13 amp and
approved to BS1362.
The plug contains a removable fuse cover that must be refitted when the fuse is replaced.
In the event of the fuse cover being lost or damaged, the plug must not be used until a
replacement cover has been obtained.
If the moulded mains plug is unsuitable for the socket outlet in your home or is removed for
any other reason, then the fuse should be removed and the cut off plug disposed of safely to
prevent the hazard of electric shock.
There is a danger of electric shock if the cut off plug is inserted into any 13 amp socket outlet.
GREEN/YELLOW
Earth
BLUE
Neutral
BROWN
Live
FUSE
13 Amp
Cord clamp
Important: how to wire a 13 amp plug
The wires in the mains lead on this appliance are coloured in accordance with the following
code:
G
REEN AND YELLOW – EARTH BLUE – NEUTRAL BROWN – LIVE
As the colours may not correspond with the markings
identifying the terminals in your plug proceed as follows:
The G
REEN AND YELLOW wire must be connected to the
terminal in the plug which is marked with the letter E or
with the earth symbol
or coloured green and yellow.
The B
LUE wire must be connected to the terminal marked
N or coloured black.
The B
ROWN wire must be connected to the terminal
marked L or coloured red.