Amcor PCMA 9KE-410 Air Conditioner User Manual


 
7
ON/OFF
Press to switch the unit on, to switch off. A buzzer will beep, and the LCD will
display 12:00 o’clock as default.
Setting the clock
Press the -button for 3 seconds to set the clock. The 2 left digits of the 4 digits on
the LCD-display will flash. Press or to adjust the hour. Press momentarily,
the 2 right digits of the 4 digits will flash. Press or to adjust the minutes of the
clock. Press the -button for 3 seconds again to activate the clock.
Setting the temperature
If you want to change the set temperature press the or -button. The 2 digit
display will indicate the set temperature.
Note: Reaching the set temperature depends on the room and outdoor climatic
conditions.
Mode
Pressing the -button to switch the operating mode between 'cooling' and 'fan
only'.
Fan speed
If you prefer a constant fan speed instead of the auto fan speed, press the -button
successively; the fan speed icon on the LCD-display will rotate accordingly.
• Fast - for the turbo speed
• Normal - for the medium speed
• Slow - for the slow speed
• Auto - alternating fast and slow speed
Timer
For all of the following TIMER programming, proceed firstly with these standard
steps:
Press the -button briefly; the 2 left digits of the 4 digits on the LCD display are
flashing.
Press or to adjust the hour.
Press the -button briefly again, the 2 right digits of the 4 digits
are flashing.
Press or to adjust the minutes of the clock in intervals of
5 minutes. The timer is set. After 10 seconds the time display
returns.
OPERATION
GB
Timer example