Filter
Top Products
Specifications
Model Number MD 250
Voltage (VDC) 12V
Power Input (W) 40W
Water Tank Capacity 1 pint
Moisture Removal 5.4 oz.
(ounces/24 hr @ 80°F 60% RH)
Weight 2.2 lbs.
Dimensions 10"H x 7"W x 6"D
2 7
Operation
1. Ensure unit is “OFF” when connecting the power cord.
2. Ensure that the filter and front vents are clean and not obstructed so air can
circulate freely through the unit.
3. The “GREEN” LED is on when in operation. The unit will switch off automatically and
the “RED” LED illuminate when the water tank is full.
4. To remove the water tank, first turn off the Mini Dehumidifier.
Hold the top of the unit, then remove the water tank and empty.
Replace the water tank back into the unit.
To continue dehumidifying, press the “ON/OFF” button to “ON” position again.
If the “BUCKET FULL” light comes on when using the unit for the first time, take the
bucket out and put it in again. The light will go off.
Emptying the Water Tank
• First, turn the MD 250 OFF (switch should be in the “O” position)
• Hold the top of the unit firmly and remover the water tank
• Turn the plug and empty the water tank
• Put the plug back in and place the water tank back into the unit
• To continue dehumidifying, press the button to ON (“I” position)
DANGER
Do not use this unit in a bathroom or shower.
Do not drip water onto the adaptor or dehumidifier.