Filter
Top Products
Operation
6
1. The thermostat maintains the desired room temperature
automatically by switching on and off.
2. Make sure the thermostat is on the “OFF” position
before plugging the heater.
3. Plug the heater.
4 ON/OFF Thermostat control knob controls the
temperature setting of the heater, and it also turns
the heater ON/OFF. When the arrow (a) indicated
below lines up with the “0” in the knob, the heater is turned OFF.
Rotating the control clockwise turns the heater ON and increases
the temperature setting of the heater.
5. Adjust the temperature as desired.
Once the heater is turned ON, the power light will illuminate.
6. The further the knob is turned clockwise the higher the
setting temperature – see “Thermostat Setting”
7. Pilot light indicator (b) shown below indicates when the
heater is operating. This indicator will light up when the
heater is ON and heating up and will be OFF when the heater
is unplugged, turned OFF, or has reached the desired temperature.
CAUTION:
FRONT GRILL IS HOT WHEN
UNIT IS IN OPERATION
Thermostat Setting
To properly set the heater to the desired temperature we recommend:
• Turn the knob clockwise, starting with a low temperature setting.
• Allow the heater to reach its set temperature.
• If a higher temperature is desired, turn the thermostat knob further clockwise.
If a lower temperature is desired, turn the thermostat knob counter-clockwise.
• Turn again the knob clockwise (just a little): in this position the thermostat will
maintain the comfortable temperature you have selected.
(a)
(b)
Pilot
Light