Filter
Top Products
GB
7
CONTROL PANEL & OPERATION
b. Pushing the Speed Button (2) repeatedly will step through the following
sequence: High fan speed, Medium fan speed, Low fan speed, Standby mode,
High fan speed...
c. The fan speed is shown on the LCD screen with bar graphs on each side and by
the fan symbol turning at different rates.
Operating the Ioniser:
a. Push the Ioniser Button (3) when the unit is operating and the ioniser will turn on
and off .
b. The ioniser operation is shown on the LCD screen with a tree symbol with
upward motion.
Timed Operation:
a. Push the Timer Button (4) repeatedly when the unit is operating and the timer
digit at bottom of the LCD screen will count up from 1 to 8 hours, turn off the
timer function and then start again counting up from 1 to 8 hours.
b. The unit will operate for the number hours selected using the Timer button (4).
As each hour passes the timer digit display will go down one hour.
c. At the end of the timed period the unit will turn off .