Filter
Top Products
5
How the Air Purifier Works
STAGE 3
Post Ionization
This stage is of utmost importance as it restores the natural balance of the air.
After the air is purified, it is further cleaned and ionized at the air outlet
using Air Purifier patented carbon filament process.
• Ionization substantially reduced the amount of indoor bacteria in the air.
• Ionization can frequently help asthma and allergy sufferers.
• Ionization may help relieve weather-related maladies such as headaches, nausea and physical aches.
• Ionization may help lower tension, producing sounder sleep.
STAGE 1
A washable filter that
contains 5 layers:
Layer One
Friction caused by air passing through
first honeycomb filter creates an
electrostatic charge that captures
and retains pollutants, dust and dirt.
Layer Two
Open Pore Polyurethane Foam
The foam is very permeable and has an
extremely high dust-holding capacity.
Layer Three
A second honeycomb filter that also cap-
tures and retains pollutants, dust and dirt
Layer Four
A second Open Pore Polyurethane Foam
Layer Five
A third honeycomb filter that captures
and retains pollutants, dust and dirt.
Layers 1-5 are contained in a
single, easy to clean cassette.
STAGE 2
Pre-ionization plus
electrostatic air filtration
Most of the minute (micron and submicron) pollutant
particles (smoke, soot, etc.) are precipitated from the
air and captured by the electrostatic filter. Only an
electrostatic filter can precipitate such small particles
effectively and quietly while using a minimum of energy.
At the pre-ionization stage the pollutants are ionized
and then are trapped by Air Purifier multiple layers of
expanded, non-corrosive aluminum screening which are
corrugated for an extended surface area. The electro-
static filter area is now larger than of previous models,
resulting in a more efficient Air Purifier. The ionizing
elements and filters are separate - making the Air
Purifier even more reliable and easy to clean.