Filter
Top Products
10
11
12
13
14
5
Control Panel
When the unit is plugged into a working outlet, and the ON button is pushed,
the LCD will display the CLOCK.
Setting On /Off
To turn the unit on, press the ON / OFF button.
1. The first time the unit is turned on, it will work in the AUTO MODE.
the VENTILATION MODE.
c. If the room is below 68
°
F, the unit will operate in the HEAT MODE.
(This is for models with the HEAT FUNCTION)
2. The unit will re-start at the last setting. At re-start, turn ON time is cancelled.
3. Press the ON / OFF button to stop the unit. The settings will be kept.
The pre-set turn OFF time will be cancelled.
Setting The Temperature
If you want to change the set temperature, press TEMP UP or TEMP DOWN.
The three digit display will indicate the set temperature.
The temperature may be set (UP or DOWN) from 62
°
F to 90
°
F
Mode Switch
Press the Mode button to select required working mode: auto–>cooling–> fan–> heating–> etc., (Heating
is only available for cooling & heating models), the corresponding sign of selected mode displays on the
LCD: O –>
–>
–>
Setting Fan Speed
Press the Speed button to selected the desired Fan speed: High or Low. This function cannot be selected
when it is in auto mode. On High speed, the fan turns faster, and on Low speed, the fan turns slower.
The selected speed will be active 2 seconds after the button is pressed.
Setting Timer
For all of the following TIMER programming, proceed firstly with these standard steps:
• Press the Timer button briefly; the 2 left digits of the 4 digits on the LCD display are flashing.
88:88
• Press Temp. Up or Temp. Down to adjust the hour,
• Press the Timer button briefly again, the 2 right digits of the 4 digits are flashing.
• Press Temp. Up or Temp. Down to adjust the minutes of the clock in intervals of 5 minutes.
The timer is set. After 8 seconds the time display returns.
Parts
1. Control Panel
2. Cooling Air Outlet
3. Handle
4. Castors
5. Air Filter
6. Air Inlet
7. Exhaust Air Outlet
8. Cord Hanger
9. Water Stopper (Rubber Plug Inside)
8
Mode Temp. Up Temp. Down Speed
Timer On/Off
Mode:
Temp. Up
Temp. Down
Fan Speed:
High / Low
Fan Speed:
High / Low
Fan Speed:
On / Off
Timer
18:00
18:00
12:00
00:00
ON
OFF
COMP
Accessories
10. Adaptor - for insertion over the
hose and into the back of the
air conditioner
11. Exhaust Hose
12. Adjustable Slide Bar
13. Round Connector
14. Cap for Round Connector
15. Remote Control
Operation
Front
Back
1
2
3
4
15
��������� :
0
0
06:00���
06:00���
�����������
24
AC or Fan/Cool/H
eat
a. If the room is warmer than 75
°
F the unit will operate in the COOLING MODE.
b. If the room is warmer than 68
°
F, but lower than 7
°
F, the unit will operate in
5
5
6
7
8
9